 |

|
INDIAN SCENARIO
PRODUCT
COVERAGE

FINAL
CRITERIA FOR PRODUCTS AS ENVIRONMENT FRIENDLY
ECOMARK
CRITERIA FOR WOOD SUBSTITUTES
(The Gazette of India,
Extraordinary, Part II-Section 3(i), No. 170, May 18, 1996)
1. GENERAL REQUIREMENTS:
-
Products manufactured shall meet relevant Indian Standards of BIS
(Bureau of Indian Standards) pertaining to safety, quality and performance.
-
The product manufacturer must produce the consent clearance, as per
the provisions of Water (Prevention and Control of Pollution) Act
1974, Water (Prevention and Control of Pollution) Cess Act 1977 and
Air (Pollution and Control of Pollution) Act 1981, along with the
authorisation if required under Environment (Protection) Act 1986
and rules made thereunder to Bureau of Indian Standards while applying
for the ECOMARK appropriate with enforced rules and regulations of
the Forest Department.
-
The product or product packaging may display in brief the criteria
based on which the product has been labelled Environment Friendly.
-
The material used for product packaging shall be recyclable, reusable
or biodegradable. V NB NB
2.
SPECIFIC REQUIREMENTS :
2.1 Substitutes for
fuel-wood :
|
2.1.1
|
Briquettes
shall be made from agricultural and wood residues (like saw
dust) and domestic wastes (like garbage) without synthetic binders,
for industrial and domestic use. Such briquettes shall not be
manufactured from any wastes material which contain any hazardous
constituents as specified under Hazardous Wastes (Management
and Handling) Rules, 1989.
Note:
The manufacturer shall provide documentary evidence by way
of certificate or declaration to this effect to Bureau of Indian
Standards while applying for Ecomark.
|
|
2.1.2
|
Biogas,
LPG and natural gases
Note:
The product container shall be suitably marked that Ecomark
label is applicable only to the contents if the product container
is not separately covered under Ecomark Scheme. It may be stated
that the Ecomark is applicable to the product or product container
or both.
|
2.2 Substitutes for
Wood Building Material :
|
2.2.1
|
Building
boards generally used as partitioning, panelling, cladding and
false-ceiling shall be made from agricultural or industrial
wastes (such as Phospho-gypsum, red mud, baggase, cotton stalk,
rice-husk, coir fibre, sisal fibre or wood residues etc., or
wood from sources other than natural forests or environment
friendly plastics as notified separately.
|
|
2.2.2
|
Door
and window frames and shutters used in buildings shall be made
from agricultural or industrial wastes or wood residues or wood
from sources, other than natural forests or ferrocement or building
boards specified in 2(ii)(a) above or environment friendly plastic
as notified separately or frames made from enforced cement concrete.
Note
1: The manufacturer shall provide documentary evidence by
way of certificate or declaration to this effect to Bureau of
Indian Standards while applying for Ecomark.
Note
2: Wood from sources other than natural forests include
wood from rubber, coconut, cashew, industrial and social forestry
plantations etc., and shade trees from tea and coffee estates.
|
2.3 Substitutes for
Wood in Furniture :
|
2.3.1
|
The
furniture (table, chairs and Stool etc.) shall be made from
agricultural or industrial wastes or wood residues or wood from
sources other than natural forests or building boards specified
in 2(ii)(a) above or environment friendly plastics as notified
separately.
|
The incorporation
of the Ecomark requirements, in the following BIS standards, are under
process :
| 1. |
IS
303:1989 |
Plywood
for general purposes
|
|
2.
|
IS
1003(Pt.1): 1991 |
Timber
panelled and glazed shutters : Part 1Door shutters
|
|
3.
|
IS
1003(Pt.2): 1991 |
Timber
panelled and glazed shutters : Part 2Window and ventilator shutters
|
|
4.
|
IS
1658:1977 |
Fibre
hardboards
|
|
5.
|
IS
1659:1990 |
Block
boards
|
|
6.
|
IS
1829(Pt.1): 1978 |
Library
furniture and fittings : Part 1 Timber
|
|
7.
|
IS
2095(Pt.1): 1996 |
Gypsum
plaster boards
|
|
8.
|
IS
2095(Pt.3): 1996 |
Gypsum
plaster boards: Part 3 Reinforced Gypsum plaster boards.
|
|
9.
|
IS
2191 (Pt.1) : 1983 |
Wooden
flush door shutters (cellular and hollow core type): Part 1
Plywood face panels
|
|
10.
|
IS
2191 (Pt.2): 1983 |
Wooden
flush door shutters (cellular and hollow core type): Part 2
Particle board and hardboard face panels
|
|
11.
|
IS
2202(Pt.1): 1991 |
Wooden
flush door shutters (solid core type):Part 1 Plywood face panels
|
|
12.
|
IS
2202(Pt.2): 1991 |
Wooden
flush door shutters (solid core type): Part 2 Particle board
face panels and hardboard face panels
|
|
13.
|
IS
2849:1983 |
Specification
for non-lead bearing gypsum partition
|
|
14.
|
IS
3129:1985 |
Low
density particle boards
|
|
15.
|
IS
3308:1981 |
Specification
for wood wool building slabs
|
|
16.
|
IS
4021:1995 |
Timber
door, window and ventilator frames
|
|
17.
|
IS
4116:1988 |
Wooden
shelving cabinets (adjustable type)
|
|
18.
|
IS
4126:1986 |
Wooden
wardrobes (adjustable type and non adjustable type)
|
|
19.
|
IS
4414:1990 |
Specification
for wooden table tops
|
|
20.
|
IS
4962:1968 |
Specification
for wooden side sliding doors
|
|
21.
|
IS
4990:1993 |
Plywood
for concrete shuttering work
|
|
22.
|
IS
5509:1980 |
Fire
retardent plywood
|
|
23.
|
IS
5823:1986 |
Dinning
tables
|
|
24.
|
IS
5923:1986 |
Wooden
clothes lockers
|
|
25.
|
IS
5974:1986 |
Specification
for divans and easy chairs
|
|
26.
|
IS
6188:1988 |
Specification
for wooden bedside table
|
|
27.
|
IS
6198:1992 |
Ledged,
braced and battened timber door shutters
|
|
28.
|
IS
6523:1983 |
Specification
for precast reinforced concrete door and window frames
|
|
29.
|
IS
6632:1988 |
Specification
for wooden folding chairs.
|
|
30.
|
IS
7070:1988 |
Wooden
shelving racks(adjustable type and non adjustable)
|
|
31.
|
IS
7259(Pt.1):1988 |
Specification
for wooden beds:Part 1 For use with mattresses
|
|
32.
|
IS
11525:1986 |
Wooden
chairs for office purposes
|
|
33.
|
IS
11679:1986 |
Wooden
tables for office purposes
|
|
34.
|
IS
12680:1989 |
Wooden
sofa-cum-bed
|
|
35.
|
IS
12896:1988 |
Classification
of Indian timbers for doors and window shutters and frames
|
|
 |